催化燃燒裝置在日常生活中的***缺點

Advantages and disadvantages of catalytic combustion devices in daily life

1. 高溫損壞的管道和設備非常簡單。

1. Pipelines and equipment damaged by high temperature are very simple.

2. 蓄熱體結塊，壽命不長;

2. The regenerator is agglomerated and its life is not long.

2. 蓄熱器結塊，壽命不長;

2. The regenerator is caked and its life is not long.

3.爐膛內壓力變化較***，導致***量熱量溢出，在實踐中未能達到節能效果;

3. The pressure in the furnace changes greatly, which leads to a large amount of heat spillover and fails to achieve energy-saving effect in practice.

3.重量壓力變化較***，導致***量熱量溢出，未能達到實際節能效果。

3. Great changes in weight and pressure lead to a large amount of heat spillover, which fails to achieve the actual energy-saving effect.

4. 增加每日的保額和資金。

4. Increase daily insurance and funds.

4. 日常防護及增加成本。

4. Daily protection and increased costs.

在實踐中，每種廢氣處理方法都有自己的***點，催化焚燒設備更適合連續排放廢氣，如果間歇排放廢氣，不僅每次預熱都需要消耗能量，反應熱量無法回收，會造成***量的能源浪費。對于本身在廢氣溫度較高的漆包線、***緣材料、烘干的烤漆等廢氣，溫度可達300℃以上，無需設置預熱設備。

In practice, each waste gas treatment method has its own advantages. Catalytic incineration equipment is more suitable for continuous emission of waste gas. If the waste gas is discharged intermittently, not only every preheating need to consume energy, but also the reaction heat can not be recovered, which will cause a lot of energy waste. For the exhaust gas such as enameled wire, insulating material and baking varnish with higher exhaust temperature, the temperature can reach above 300 C, without setting preheating equipment.

在實踐中，每種廢氣處理方法都有自己的***點。催化焚燒設備更適合連續排放廢氣。如果間歇排放廢氣，每次預熱只需要吸收能量，而且反應熱不能溶解和利用，會造成很***的能量浪費。對于排氣溫度從a到who的場合，如漆包線、***緣材料、烤漆等，溫度可達300℃以上，不需要預熱設備。

In practice, each waste gas treatment method has its own advantages. Catalytic incineration equipment is more suitable for continuous emission of waste gas. If the exhaust gas is discharged intermittently, each preheating only needs to absorb energy, and the reaction heat can not be dissolved and utilized, which will cause a great waste of energy. For exhaust temperature from a to WHO occasions, such as enameled wire, insulating materials, baking paint, etc., the temperature can reach more than 300 C, without preheating equipment.

催化焚燒的機器設備,該設備廣泛應用于各種工況的使用環境,從催化焚燒是一個典型的氣-固相催化反應,它借助催化劑降低了反應的活化能,在低點火溫度200 ~ 300℃下無焰燃燒,發生在固體催化劑表面氧化有機物,同時二氧化碳和水,并釋放***量的熱量,由于其低溫氧化反應，所以極***地抑制了氮氣氮氧化物在空氣中高溫的形成。由于催化劑的選擇性催化作用，有可能限制燃料中含氮化合物(RNH)的氧化過程，使其中***部分形成分子氮(N2)。

Catalytic incineration is a typical gas-solid catalytic reaction. It uses catalysts to reduce the activation energy of the reaction. It burns flamelessly at low ignition temperatures of 200-300 degrees C. It occurs on the surface of solid catalysts to oxidize organic compounds, carbon dioxide and water, and releases a lot of heat due to its low temperature oxidation reaction. Therefore, the formation of nitrogen oxides at high temperature in air is greatly inhibited. Because of the selective catalysis of catalysts, it is possible to limit the oxidation process of nitrogen compounds (RNH) in fuels, and make most of them form molecular nitrogen (N2).

Photooxygen催化設備

Photooxygen Catalytic Equipment

催化焚燒爐設備，該設備廣泛，適用于各種工況。“氣體催化焚燒”是一種典型的氣固催化反應。它降低了反應的活化能有催化劑的幫助下,***服務這火焰——免費的焚燒以更低的點火溫度200 - 300度。有機物氧化反應發生在固體催化劑的表面,而CO2和H2O發生發生,釋放出***量的熱量。由于其氧化反應溫度較低，空氣中N2的含量******抑制了其生成高溫NO 2。此外，由于催化劑的選擇性催化作用，燃料中氮的氧化過程可能受到限制，***部分形成分子氮(N2)。

Catalytic incinerator equipment, which is widely used in various working conditions. Gas-catalyzed incineration is a typical gas-solid catalytic reaction. It reduces the activation energy of the reaction with the help of catalysts, and serves the flame at a top level - free incineration at a lower ignition temperature of 200 - 300 degrees. The oxidation of organic compounds occurs on the surface of solid catalysts, while CO2 and H2O occur, releasing a large amount of heat. Because of its low oxidation temperature, the content of N 2 in air greatly inhibits the formation of high temperature NO 2. In addition, due to the selective catalysis of catalysts, the oxidation process of nitrogen in fuels may be limited, most of which form molecular nitrogen (N2).

與傳統的火焰焚燒相比，催化焚燒具有很***的***點:

Compared with traditional flame incineration, catalytic incineration has great advantages:

與傳統的火焰焚燒和催化焚燒相比，具有很***的***點。

Compared with traditional flame incineration and catalytic incineration, it has great advantages.

(1)點火溫度低，能耗低，易于達到穩定燃燒，甚至到點火溫度無需外部傳熱即可完成氧化反應。

(1) Low ignition temperature, low energy consumption, easy to achieve stable combustion, even to the ignition temperature without external heat transfer can complete the oxidation reaction.

(1)點火溫度低，能耗低，易于您的穩定焚燒，即使在點火溫度后沒有外部傳熱也能完成氧化反應。

(1) Low ignition temperature, low energy consumption, easy for your stable incineration, even without external heat transfer after ignition temperature can complete the oxidation reaction.

(2)凈化效率高，污染物排放水平低(如NOx和非焚燒產品)。

(2) High purification efficiency and low pollutant emission level (such as NOx and non-incinerated products).

(2)凈化效率高，污染物(對as NOx及非焚燒產品)排放水平低。

(2) The purification efficiency is high and the emission level of pollutants (as NOx and non-incinerated products) is low.

(3)習慣氧濃度規模***，噪聲小，無二次污染，燃燒適中，成本低，操作管理方便

(3) Habitual oxygen concentration is large in scale, low in noise, no secondary pollution, moderate in combustion, low in cost and convenient in operation and management.

(3)習慣性氧濃度規模***，噪聲低，無二次污染，焚燒適中，作業成本低，也有作業和管理。

(3) Habitual oxygen has large scale, low noise, no secondary pollution, moderate incineration, low operating cost, and operation and management.

催化劑的種類和性能要求

Categories and Performance Requirements of Catalysts

催化劑類型和性能要求

Catalyst Types and Performance Requirements

目前,主要有兩種類型的催化劑***內外主要研究:一個是貴金屬催化劑,這種催化劑的活性和穩定性***,技能更成熟,但由于貴金屬價格高,缺乏資源,所以未能產業化;另一種非金屬催化劑f

At present, there are two main types of catalysts at home and abroad: one is noble metal catalyst, which has good activity and stability and more mature skills, but because of the high price of noble metals and lack of resources, it has not been industrialized; the other is non-metallic catalyst f